Softwire Concentrator Configuration - Juniper 6rd Configuration Manual

7.9.3 Softwire Concentrator Configuration

[edit services]
user@router# show softwire
softwire-concentrator {
ds-lite ds1 {
}
v6rd v6rd-dom1 {
}
}
rule v6rd-r1 {
match-direction input;
term t1 {
}
}
rule dslite-r1 {
match-direction input;
term dslite-t1 {
}
}
Because of this configuration, the following routes are added by the services PIC daemon on the routing engine.
user@router# run show route 30.30.30.1
inet.0: 43 destinations, 46 routes (42 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
30.30.30.1/32
[edit]
user@router# run show route 3040::0/16
inet6.0: 23 destinations, 33 routes (23 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
3040::/16
[edit]
user@router# run show route 1001::1
inet6.0: 33 destinations, 43 routes (33 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
1001::1/128
Copyright © 2011, Juniper Networks, Inc.
softwire-address 1001::1;
mtu-v6 9192;
softwire-address 30.30.30.1;
ipv4-prefix 10.10.10.0/24;
v6rd-prefix 3040::0/16;
mtu-v4 9192;
then {
v6rd v6rd-dom1;
}
then {
ds-lite ds1;
}
*[Static/786432] 00:24:11
Service to v6rd-dslite-service-set
*[Static/786432] 00:24:39
Service to v6rd-dslite-service-set
*[Static/1] 1w2d 22:05:41
Service to v6rd-dslite-service-set
IMPLEMENTATION GUIDE - 6rd Configuration Guide
23