Table of Contents
Advertisement
C
Attach the mounting bracket to the wall plate
(1) Hang the mounting bracket hook onto the wall plate bar (
(2) Lift up the mounting bracket and pass the cables through it (
Caution
Take care not to trap the cables between the mounting bracket and wall plate.
(3) Tighten the two M8 x 15 mm hexagon socket head cap bolts and two M8 x 35 mm hexagon
socket head cap bolts supplied with the mounting bracket so that the mounting bracket
becomes horizontal (
Use the two M8 x 35 mm hexagon socket head cap bolts to adjust the vertical slide.
s p. 17
Mounting bracket
D
Secure the projector to the mounting bracket
(1) Loosen the two screws and remove the cable cover from the projector.
C
).
Screws (2)
12
A
).
B
).
Wall plate
Wall plate bar
Mounting bracket hook
Cables
M8 x 15 mm hexagon socket
head cap bolts (one on left
and one on right)
M8 x 35 mm hexagon
socket head cap bolts (2)
Cable cover
Advertisement
Table of Contents
