Adjusting The Projection Screen; Turn On The Projector; Change The Aspect Ratio; Display The Test Pattern - Epson Mounting bracket Installation Manual

6. Adjusting the Projection Screen

To ensure maximum projection screen quality, follow the steps below to adjust the projection screen.
Do not make adjustments with the Keystone function of the projector. Doing so may
result in a reduction in image quality.
A

Turn on the projector

Using Remote Control
B

Change the aspect ratio

Each time you press the [Aspect] button on the remote control, the aspect name is displayed on the
screen and the aspect changes.
Change the setting according to the signal for the connected equipment.
Remote Control
Alternatively, set the aspect ratio from the [Signal] menu - [Aspect] from the Configuration menu.
s User's Guide for the projector: [Configuration] menu - [Signal] menu
C

Display the test pattern

Press the [Menu] button and select the [Settings] menu - [Pattern] - [Test Pattern] from the
Configuration menu.
s User's Guide for the projector: [Configuration] menu - [Settings] menu
Using Remote Control
Using Control Panel
Using Control Panel
14
Aspect Ratio