Adding Empty Panels; Copying And Pasting Buttons; Copying Art From One Button To Another; Cleaning Up Device Properties - Marantz RC5000 Manual

Copying panels and Tab Navigation
Note Copying panels from one device to another does not update jumps to panels.You will
have to manually reprogram any tab navigation buttons to jump to the new device.

Adding Empty Panels

Select a panel, HOME, or the device or macro group to which you want to add a panel and click
on in the toolbar or select Add Panel from the Panel menu while holding down the shift
key. This creates a totally empty panel. If a panel is selected, the newly added panel is inserted
just before the selected panel.
If you don't hold down the shift key, you will get a new panel with the Marantz default artwork in it. For
home panels, Marantz provides the standard eleven button home. For devices, Marantz provides a total-
ly empty panel with no artwork in it (however, you could create a default device panel with your own art
in it, see page 58). For Macro panels, Marantz provides a standard five button panel.

Copying and Pasting Buttons

1. Open the panel view of the panel with the button you want to copy.
2. If you want to copy a button to another panel, then open the panel view of the panel to
which you want to copy a button.
3. Hold down the CTRL key, click on the button you want to copy, hold down the left mouse
button and drag the button to the location to which you want to copy it, and release the left
mouse button to drop the dragged button.
RC5000 Setup does not support copying from one running copy of RC5000 Setup to support another.

Copying Art from One Button to Another

After creating a button and putting a few actions into its action list, you may want to change the
appearance of that button without having to recreate the action list.You can easily do this by
copying all of the artwork from another button to this button.
1. Open the panel view of the panel with the button of which you want to copy art.
2. If you want to copy art from a button in another panel, open the panel view of that panel.
If you want to copy art from a button in the gallery, open the gallery.
3. Press and hold the ALT key, click on the button from which you want to copy icons, drag
it to the button to which you want to copy bitmaps, and drop the dragged button.

Cleaning Up Device Properties

Many of the devices in the default ccf have an IR code programmed in the Device Action list to
select the appropriate input on a Marantz preamp/receiver. If you would like to avoid this,
delete any and all codes you find in the Device Action lists.
53
Programming Tips