Download
Share
Print this page
Marantz RC9001 Service Manual
  1. Manuals
  2. Brands
  3. Marantz Manuals
  4. Remote Control
  5. RC9001
  6. Service manual
Marantz RC9001 Service Manual

Marantz RC9001 Service Manual

Touch screen remote control
Hide thumbs Also See for RC9001:

Advertisement

Quick Links

See also: User Manual
Service
Manual
SECTION
1. TECH NI CAL SPEC I FI CA TIONS ........................................................................................... 1
2. EXPLODED VIEW ................................................................................................................ 2
3. MECHANICAL INSTRUCTIONS & SET DISASSEMBLY ..................................................... 3
4. MECHANICAL INSTRUCTIONS & SET RE-ASSEMBLY....................................................12
5. PARTS LIST ........................................................................................................................ 20
Please use this service manual with referring to the user guide ( D.F.U. ) without fail.
RC9001
DS9001

TABLE OF CONTENTS

RC9001
RC9001 /
Touch Screen Remote Control
A1S/F S/N1S/T1S/U1S
PAGE
Part no. 90M28CW855010
First Issue 2007.07
MZ

Advertisement

loading
Need help?

Need help?

Do you have a question about the RC9001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Marantz RC9001

Summary of Contents for Marantz RC9001

  • Page 1: Table Of Contents

    Service RC9001 / A1S/F S/N1S/T1S/U1S Manual Touch Screen Remote Control RC9001 DS9001 TABLE OF CONTENTS SECTION PAGE 1. TECH NI CAL SPEC I FI CA TIONS ................... 1 2. EXPLODED VIEW ........................ 2 3. MECHANICAL INSTRUCTIONS & SET DISASSEMBLY ............. 3 4.
  • Page 2 Parts for your MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent. ORDERING PARTS : Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specifi ed.

  • Page 3: Technical Specifications

    1. TECHNICAL SPECIFICATIONS Display 3.7 inch TFT color display with touch screen ディスプレイ インチ カラー・タッチスクリーン・ VGA (640 x 480 pixels) resolution landscape 液晶ディスプレイ 解像度： 640 x 480 ピクセル横画面 （ ） 、 65,536 colors 65536 色 Interface USB 2.0 port connector インターフェイス...

  • Page 4: Exploded View

    2. EXPLODED VIEW...

  • Page 5: Mechanical Instructions & Set Disassembly

    3. MECHANICAL INSTRUCTIONS & SET DISASSEMBLY Remove rubber feet ITEM 7 to make the screw accessible. Remove screw ITEM 203 (Torx screw M2x10). Remove the bottompart cover assy ITEM 20 by sliding it open Location of adhesive damper ITEM 6 to prevent rattling of battery pack...
  • Page 6 Take the battery out, ITEM 251, disconnect battery connector NOTE: To close the unit go to P…. Battery replacement set: ITEM 251 (1x) battery ITEM 7 (2x) rubber feets Remove screw M2x8 ITEM 202 Take away 2 screw M2x8 ITEM 202 and pwb cover ITEM 35 Release two snaphooks and take the SUB PWB ITEM 1002...
  • Page 7 Disconnect SUB PWB ASSY ITEM 1002 to release the flex- cable (unlock connector 1003 with the help of a pincet). On-off switch ITEM 33 take out of the bottom Docking insert assy ITEM 22 take out of the bottom Remove 2 screw ITEM 202 (Torx screw M2X8) on the position as shown in the picture Release bottompart (item 02) from toppart (item 01) and goes from the rightside to the leftside.
  • Page 8 Overview of different snapholes in toppart assy (for information only) Take the toppart assy and place it on the table...
  • Page 9 Open the bottompart assy from the toppart and place it also on the table, see next picture Disconnect the speaker plug (connector 1601) Lift the 2 snaphooks fom the speaker...
  • Page 10 IR-WINDOW Remove IR- Window BACKLIGHT BUTTON Remove backlight button Remove 2 screw M2X8 ITEM 202 Touchpad connector ITEM 10 to release the flexcable (unlock connector …. with the help of a pincet Click two times from left side to right side...
  • Page 11 Remove 3 screw M2X8 ITEM 202 Remove MAIN PWB assy ITEM 1001 Remove the following components from the toppart sub assy ITEM 1 Keymat stand by assy ITEM 8 Keymat cursor assy ITEM 9 Lower keyhinge assy ITEM 13...
  • Page 12 Be carefully: ITEM 1a + ITEM 10 Toppart sub assy + tochscreen preserve this subsam assy for the rest untouched !! Don’t remove anything else as mentioned in this list Remove cursor ring assy ITEM 27 Remove cursor holder ITEM 28 Remove screw M2x4 ITEM 200 Overview mechanical toppart components...
  • Page 13 Overview mechanical components...

  • Page 14: Mechanical Instructions & Set Re-Assembly

    4. MECHANICAL INSTRUCTIONS & SET RE-ASSEMBLY ITEM 17 LCD bezel + ITEM 16 LCD module Release the LCD bezel ITEM 17 from PB 1001, push downwards to unlock the 4 plastic snaps in the snap holes Release the flex cable from LCD ITEM 16 to unlock the connector 1401 by till up the lid from connector 1401 (90 degrees), and take the LCD module out the LCD bezel ITEM For LCD re-assembling use the opposite sequence order...
  • Page 15 SUBSAM TOUCHSCREEN SERVICE For service people, the toppart (item 01) same with the touchscreen (item 10) is already prepared as “subsam part” an can be ordered under the codenumber 3104 207 15770 In case of replacement follow the instructions Set Re- assembly on page 3-1 ASSEMBLE INSTRUCTIONS Toppart...
  • Page 16 2. Key placement Keymat cursor ITEM 9 Keymat stby ITEM 8 Lower key hinge ITEM 8 (Spring cursor ring) 3. LCD + Bezel placement ITEM 16 LCD module ITEM 17 LCD bezel 4. LCD flex placement Place the flex of the LCD perfectly into the connector and close them 5.
  • Page 17 Push with your finger the left and the right snaphooks into the pwb assy Mount 3 screw M2x8 ITEM 202 6. Flex placement Place the flex into the connector and close them with a pincet 2. Bottompart Mount speaker into the bottom and click on the two snaphooks Backlight key ITEM 5...
  • Page 18 3. Toppart + Bottompart Click the connector of the speaker on the MAIN PWB assy Place the bottom on the top don’t forget the flex Place the 2 screw M2X8 ITEM 202 Place the flexcable into the hole of the bottom Click the bottom on the top...
  • Page 19 Place the On-off switch Place the docking insert assy Place the flex into the connector and close them with a pincet Place the pwb into the bottom Push the flex into the hole Click the SUB PWB ASSY into the two snaphooks...
  • Page 20 Place the SUB PWB cover ITEM 35 Place screws M2x8 ITEM 202 Place the connector on the MAIN PWB ASSY and put batterypack into the hole Place the Bottom cover assy Place the screw M2x10 ITEM 203...
  • Page 21 Place the new rubber foots ITEM 7 Place IR-window assy ITEM 4 and push it into the different clickhooks Place pen assy ITEM 93 into the hole...

  • Page 22: Parts List

    AC/DC ADAPTOR AY3192/00 N1S 314011833803 /T1S 90M-AA000140R 90M-AA000140R AC ADAPTOR AC/DC ADAPTOR AY3192/05 T1S 314011833812 /U1S 90M-AA000150R AC ADAPTOR AC/DC ADAPTOR AY3192/17 JAPAN & US 272201200635 NOTE : "nsp" PART IS LISTED FOR REFERENCE ONLY, MARANTZ WILL NOT SUPPLY THESE PARTS.

  • Page 23: Docking Station

    DS9001 Docking Station For reference only POS. NO. 999 PART NO. 90M-ZK000730R UNIT KIT...
  • Page 24 EXPLODED VIEW The following parts are not supplied as service parts. 下記部品のサービス部品供給はありません。...
  • Page 25 MECHANICAL INSTRUCTIONS & SET DISASSEMBLY Docking station ITEM 34: Push on the left side to the standplate and remove Remove rubber foot to make the screws accesible ITEM 7 Remove screw ITEM 201...
  • Page 26 ITEM 36 Go with a pincet to the rubberstrip and the plastic and remove them Remove screw ITEM 201 and take away the rubber strip Remove screw ITEM 201 and take away the rubber strip Release bottompart from the toppart...
  • Page 27 Remove the lightguide ITEM 21 Remove srew ITEM 0201 PWB ASSY ITEM 1001 FLEXCABLE ITEM 8000 PWB ASSY ITEM 1002...

This manual is also suitable for:

Rc9001/a1sRc9001/u1sDs9001Rc9001/n1sRc9001/fsRc9001/t1s