Appearance - Mitsubishi Electric PAR-21MAA Technical Manual

# . Appearance

1. Display Section
For purposes of this explanation,
all parts of the display are shown
as lit. During actual operation, only
the relevant items will be lit.
Identifies the current operation
Shows the operating mode, etc.
* Multilanguage display is sup-
ported.
"Centrally Controlled" indicator
Indicates that operation of the re-
mote controller has been prohibited
by a master controller.
"Timer is Off" indicator
Indicates that the timer is off.
Temperature setting
Shows the target temperature.
2. Operation Section
Set Temperature buttons
Down
Up
Timer Menu button
(Monitor/Set button)
Mode button (Return but-
ton)
Set Time buttons
Back
Ahead
Timer On/Off button
(Set Day button)
Opening the
door.
Note:
 If you press a button for a feature that is not installed at the indoor unit, the remote controller will display the "Not Available"
message.
If you are using the remote controller to drive multiple indoor units, this message will appear only if the feature is not present
at every unit connected.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto Off
timer is set.
If the simple or Auto Off timer is set, shows the time re-
maining.
TIME SUN MON TUE WED THU FRI SAT
TIMER
AFTER
ERROR CODE
°F°C
ONLY1Hr.
Up/Down Air Direction indi-
cator
The indicator shows the direc-
tion of the outcoming airflo .
"One Hour Only" indicator
Displayed if the airflow is set to
low and downward during COOL
or DRY mode. (Operation varies
according to model.)
The indicator goes off after  hour,
at which time the airflow direction
also changes.
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
Hr ON
AFTER OFF
FUNCTION
°F°C
FILTER
WEEKLY
SIMPLE
AUTO OFF
Room Temperature display
Shows the room temperature.
Louver display
Indicates the action of the swing
louver. Does not appear if the lou-
ver is stationary.
(Power On indicator)
Indicates that the power is on.
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
"Sensor" indication
Displayed when the remote con-
troller sensor is used.
"Locked" indicator
Indicates that remote controller
buttons have been locked.
"Clean The Filter" indicator
Comes on when it is time to
clean the filte .
Timer indicators
The indicator comes on if the
corresponding timer is set.
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running
in Ventilation mode.
ON/OFF button
Fan Speed button
Filter button
(<Enter> button)
Test Run button
Check button (Clear button)
Airflow Up/Down butto
Louver button
( Operation button)
To preceding operation
number.
Ventilation button
( Operation button)
To next operation number.
5