Mitsubishi Electric PAR-21MAA Technical Manual page 25

1 Weekly Timer
 The weekly timer allows you to set up to 8 operations per day of the week.
• For each operation, you can set the ON (start) or OFF (stop) timer and temperature. The start timer, stop timer and tempera-
ture can also be set individually.
• The air conditioner is operated at the times you have set and according to the settings you have made.
 The time for the weekly timer can be set in -minute increments.
* If "OFF" is selected to disable the clock function, the weekly timer cannot be used to make day of the week/time settings.
To use the weekly timer to set the day of the week and time, the clock function must be set to "ON" (default).
(Refer to 4.3.2)
Note
With the weekly timer, it is not possible to designate an operation mode.
The air conditioner will be operated in the currently selected operation mode. (Cool, Dry, Heat or Auto)
How to set the Weekly Timer
(1) Make sure that "WEEKLY" is displayed on the screen (at
(2) Press the
MENU
[Display ]
(3) Press the
ON/OFF
[Display ]
(4) Press the and
[Display ]
* A cell from the following setup matrix is selected according to the settings you have made in steps (2) and (3).
Set up Matrix
Op No.
no
no2
...
no8
Note
If "Sun – Sat" is set in step (3), the same pattern can be set for each day of the week.
The same pattern is set in the shaded areas in the above setup matrix.
(Example: Selecting "Sun – Sat" and setting operation No. "no2")
 Display example (for
(7)
(3) (11)
(10)
(2)
(5)
button to select
TIMER
TIMER SET
MONITOR
:ENTER
button until the desired day of the week appears.
Sun-Sat Sun Mon
buttons to set the desired operation No. (Up to 8 patterns can be set.)
Sunday Monday
• 8:30
• ON
• 23 °C
• 0:00
• 0:00
• OFF • OFF
)
C
).
on the screen (at ).
Fri Sat
... Saturday
• 0:00 • 0:00
• OFF • OFF
(6)
(8)
(4)
- Setting contents -
Starts the air conditioner at 8:30 with the tem-
perature set to 23 °C.
- Setting contents -
Stops the air conditioner at 0:00.
23