Mitsubishi Electric PAR-21MAA Technical Manual page 26

(5) Press the [CLOCK] buttons (
[Display ]
(6) Press the
[Display ]
(Space)
(7) Press the [TEMP] buttons (
[Display ]
(Space)
Temperature setting range : The temperature can be set within a range of 2 °C to 30 °C. However, the setting range varies
(8) After completing the settings in steps (4) to (7), press the
To cancel the settings you have made, press the
* The time setting will change to "- -:- -", and the ON/OFF and temperature settings will all disappear.
(To clear all the weekly timer settings you have made, hold down the
more until the settings blink. All of the settings will be cleared.)
Note
The settings you have made can be cancelled by pressing the
button.
When 2 or more different operations for the same time are set, only the operation with the large operation No. will be
effective.
(9) Repeat steps (3) to (8) to set the contents in the setup matrix.
(0) Press the
MODE
() If you press the
Make sure that "
How to Review the Weekly Timer Settings
(1) Make sure that "WEEKLY" is displayed on the screen (at
(2) Press the
MENU
(3) Press the
ON/OFF
(4) Press the and
* The settings are displayed in order of time setting.
(5) To close the and return to the normal screen, press the
To Turn Off the Weekly Timer
() Press the
ON/OFF
24
and
button to select whether to start or stop the air conditioner at the time you have set in step (5).
ON OFF
and ) to set the desired room temperature. (2 °C to 30 °C)
with the type of the air conditioner. (Refer to 4-2-3.)
(BACK) button to return to the normal screen and complete weekly timer setting.
button, the weekly timer will start and "
ON/OFF
" disappears.
button to display
button to select the day of the week you want to check.
buttons to switch the settings from one to another, one at a time.
button to display on the screen (at
) to set the desired time. (0:00 to 23:59)
( ) button to confirm them.
FILTER
(CLEAR) button once.
(BACK) button before pressing
MODE
).
on the screen (at ).
button.
MODE
С
).
C
C
(CLEAR) button for 2 seconds or
" will disappear from the screen.
( )
FILTER