Mitsubishi Electric PAR-21MAA Technical Manual page 31

3 Simple Timer
 You can set the simple timer in any of 3 ways.
 Start time only : The air conditioner starts when the set time has passed.
 Stop time only : The air conditioner stops when the set time has passed.
 Start & Stop times : The air conditioner starts and stops at the respective passed times.
 The simple timer (Start and stop) can be set only once within a 72-hour period.
The time setting is made in hour increments.
Note : Timer operation is not possible when:
A timer is operating, an error has occurred, the air conditioner is operating, the remote controller is diagnosing a prob-
lem, function selection is in progress, timer setting is in progress, or the system is centrally controlled.
(ON/OFF operation is prohibited under the above conditions.)
 If the simple timer is not currently selected, select it and make the necessary changes to the current settings as explained
below.
Switching to the simple timer
Steps () to (5) are necessary when switching the timer function from auto off timer, weekly timer and no timer.
() While pressing the
MODE
tion selection mode.
(2) Press the button until
MODE
CHANGE
[Display ]
LANGUAGE
(3) Press the
MENU
(4) Press the
ON/OFF
TIMER MODE
[Display ]
OFF
(5) While pressing the
MODE
* If you press the
ON/OFF
 Display example
(1) (5)
(2)
(3)
(4)
button, press the
appears on the screen (at
FUNCTION
SELECTION
button so that "TIMER" appears on the screen (at
button until "SIMPLE TIMER" appears on the screen (at
AUTO OFF
TIMER
button, press the
button before the
button for 2 seconds to activate the remote controller's func-
ON/OFF
).
MODE
SELECTION
).
SIMPLE
TIMER
button for 2 seconds to return to normal mode.
ON/OFF
button, the settings you have made will be cancelled.
MODE
DISP MODE
SETTING
).
WEEKLY
TIMER
29