Contact Number Setting For Error Situation - Mitsubishi Electric PAR-21MAA Technical Manual

4.3.3 Contact Number Setting for Error Situation
The following settings can be made.
1 CALL • OFF (default) : The preset contact number is not displayed even when an error occurs.
: The preset contact number is displayed when an error occurs. (The contact number can consist of up
2 CALL • ************
CALL • – : The contact number is not set in default setting. It is displayed.
Setting the Contact Numbers
() While pressing the
MODE
tion selection mode.
(2) Press the button until appears on the screen (at
MODE
[Display ]
CHANGE
LANGUAGE
(3) Press the
MENU
[Display ]
TIMER
(4) Press the
ON/OFF
Do not show
[Display ]
[Display ]
(5) Press the
digit position left or right, press the [TEMP] buttons (
[Display ] 0
The contact number can contain up to 2 digits.
[When entering "012"]
[Display ] CALL • 012_
"0" → Press the
Each time a value is entered, press the [TEMP] button (
"1" → Press the
"2" → Press the
to 2 digits.)
 Display example
(5)
(1) (6)
(2)
(3)
(4)
(5)
button, press the
FUNCTION
SELECTION
button until "CALL" appears on the screen (at
CALL .
button to select whether or not to show the contact number.
Show
CALL . CALL .
buttons ( and
1 9
button ( ) once.
button ( ) twice.
button ( ) 3 times.
button for 2 seconds to activate the remote controller's func-
ON/OFF
).
MODE
SELECTION
).
CONTROLLER CLOCK
) to set the desired contact number, one digit at a time. To move the input
and ).
Space
) to move the cursor to the next digit to the right.
(7)
DISP MODE
SETTING
33