Refusing Incoming Calls (Do Not Disturb [Dnd]) - Panasonic Hybrid IP-PBX KX-TDA15 User Manual

1.7 Setting the Telephone According to Your Needs
1.7.2

Refusing Incoming Calls (Do Not Disturb [DND])

– Do Not Disturb (DND)
– Switching FWD/DND Status Using Fixed FWD/DND Button
Do Not Disturb (DND)
You can set this feature to prevent incoming calls from ringing at your extension. This can be useful, for
example, when you are in a meeting or busy.
To set/cancel
PT/SLT/PS
Off-hook.
• When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing the
FWD/DND button (fixed button) instead of " 710".
• The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode
• The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1)
(2)
Note
• If your extension has set this feature, a calling extension will hear DND tone.
• If this feature is set, the Call Forwarding (FWD) feature does not work.
• Specified extensions can override this feature and call DND extensions (DND Override).
110 User Manual
7 1
Enter 71 . Enter 0 to 2 as you desire.
When in FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as
shown below:
FWD DND
When in FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the
FWD/DND status and set the FWD destination (refer to "Switching FWD/DND Status
Using Fixed FWD/DND Button").
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
0
Both Calls
OR
1 Outside Calls
OR
Intercom Calls
2
Off
1
Set
OR
C.Tone
0
Cancel
Enter 1 to set
or 0 to cancel.
On-hook.