4.1 Troubleshooting
Problem
I do not want to display a number which
is stored in memory.
I want to confirm my extension number.
The date and time are not correct.
The display is not shown well.
I want to distinguish the tones.
The MESSAGE button light lit.
200
User Manual
•
Conceal the number.
(
Storing Names and Numbers, 3.1.3 Customising the
Buttons)
•
(
Your Extension Number in 1.1.1 Before Operating the
Telephones)
•
Set the date and time by system programming. (
Date & Time [000] in 3.3.2 System Programming)
•
Change the Display contrast level.
(
3.1.2 Settings on the Programming Mode)
•
(
To distinguish the ringing tones for each CO,
INTERCOM or ICD Group button (Digital proprietary
telephone only), 3.1.3 Customising the Buttons)
•
Another extension left you a message waiting
indication while you were on the phone or away from
your desk.
Remedy