Troubleshooting - Panasonic Hybrid IP-PBX KX-TDA15 User Manual

Hybrid ip-pbx
Hide thumbs Also See for Hybrid IP-PBX KX-TDA15:
Table of Contents

Advertisement

4.1 Troubleshooting

4.1

Troubleshooting

4.1.1
Troubleshooting
Troubleshooting
Problem
The telephone does not work properly.
I cannot use the telephone.
Some features do not work.
Even though following the manual
instructions, none of the operations
work when using a proprietary
telephone.
The parallelled single line telephones do
not ring.
The telephone does not work using the
personal settings or with other settings.
(One-touch dialling, forwarding
destination, etc.)
My proprietary telephone does not have
a feature button.
198
User Manual
Consult your dealer.
The telephone is locked.
Unlock your telephone. (
People from Using Your Telephone (Extension Dial Lock),
2.1.1 Extension Control)
Your telephone is connected to an eXtra Device Port.
System programming is required. Consult your dealer.
System management may restrict certain features.
Consult your manager.
The feature numbers have changed.
Confirm the revised number and try again.
The Intercom line was not seized. The seized line, when
going off-hook, was changed by personal setting. (
3.1.2 Settings on the Programming Mode)
In the manual, going off-hook means an Intercom line
is seized.
If the setting has been changed, press the INTERCOM
button after going off-hook and follow the instructions.
"No ring" may be selected.
Change the setting to ring. (
Parallelled Telephone to Ring (Parallelled Telephone))
The extension line has been changed. The previous
telephone's settings have not been cleared.
Clear the settings and then programme your desired
settings again. (
Extension (Extension Feature Clear), 3.1.1 Customising
Your Phone (Personal Programming), 3.1.3 Customising
the Buttons)
Some models do not have the feature button.
Change a flexible button to the desired button. (
3.1.3 Customising the Buttons)
Enter the specified feature number instead of the
feature button. (
Telephones)
Remedy
1.5.4 Preventing Other
1.7.11 Setting the
1.7.13 Clearing Features Set at Your
1.1.1 Before Operating the

Advertisement

Table of Contents
loading

Table of Contents