Inherent Drawbacks Of Cordless Blower Requiring Particular Attention During Sales Promotion - Hitachi RB 14DL Technical Data And Service Manual

(8) Do not attempt to disassemble the storage battery or the charger.
Special devices, such as a thermostat, are built into the storage battery and charger to permit rapid
charging. Incorrect parts replacement and/or wiring will cause malfunctions which could result in fire or
other hazards. Instruct the customer to bring these units to an authorized service center in the event
repair or replacement is necessary.
(9) Disposal of the storage battery (Types BCL 1430 and EBL 1430 for the Model RB 14DL, EBM 1830
for the Model RB 18DL)
Ensure that all customers understand that the storage batteries Types BCL 1430 and EBL 1430 for the
Model RB 14DL and EBM 1830 for the Model RB 18DL should be returned to the Hitachi power tool
sales outlet or the authorized service center when they are no longer capable of being recharged or
repaired. If thrown into a fire, the battery may explode.
B. Caution plate
The following cautions are listed on the name plate attached to each of the Types BCL 1430, EBL 1430 and
EBM 1830.
[ For Europe ]
[ For the U.S.A. and Canada ]
2. Inherent drawbacks of cordless blower requiring particular
attention during sales promotion
The cordless blower offers many advantages: it can be used in places where no power source is available,
the absence of a cord allows easy use, etc. However, any cordless tool has certain inherent drawbacks.
Salespersons must be thoroughly familiar with these drawbacks in order to properly advise the customer in
the most efficient use of the tool.
A. Suggestions and precautions for efficient use of the tool
(1) Use the cordless blower for comparatively light work.
Because the Models RB 14DL and RB 18DL are battery-operated, the output of the motor in cordless
blower is rather low in comparison with conventional electric power tools. Accordingly, they are not
suitable for continuous blowing in succession, which creates a heavy load. Salespersons should
recommend conventional electric power tools for such heavy work.
-5-