Jenn-Air JRTDE228 Use And Care Manual page 11

The crisper cover also serves as a refrigerator storage shelf. Below are directions for
removing the crisper cover for cleaning.
Model JRTEt76: Lift thefront edge and pull straight out. To replacethe cover,set rear bars
on supports and push back until the front can be loweredinto place. If the crisper shelf is not
"_ level, adjust the support leg (see below).
Models JRTE198, JRTE218,JRTDE228: Pushup on the glass cover from underneathand
carefully remove.
Leveling Crisper Shelf ,____._ ,-__>_"
(Model JRTE176 Only) _._
If the crisper shelf is not level, adjust the support
leg as shown.
Humidity Control
(Most Models)
The humidity control levers are located on the shelf above the crisper drawers. The slide
control should generally be set at the "Low" setting for fruits and the "High" setting for
vegetables.
il
Wine Rack
To use your wine rack fit it along either
side of any refrigeratorshelf and lay the _
,.-- wine bottle on the rack.
Occasionally, you may notice water droplets on the back wall. This is normal.
Defrostwater is used to maintainhumidity level and helpskeep food fresh longer.
Excess water drains into the defrost pan beneath the cabinet and evaporates.
11