Page 1
Your Jenn-Air frost-free refrigerator was designed, engineered, and manufac- tured to the highest standards of quality and performance. Since this manu- al explains how you can obtain the best use of your Jenn-Air, it is essential that you follow the instructions Should you have any questions about using your Jenn-Air appliance, write to us.
Page 2
Door " and Automatic Freezer Shelves Dispenser Bin Control Freezer Bulk . Control Sealed Shelves Storage Drawer Drawer Crisper Drawer MODEL JRSD226 Refrigerator Control Dairy Wine Rack Caddy Compartment Shelf Tender Lift-Off Shelves able Glass Easy-Off Cantilever Shelf Fronts Shelves...
Page 3
Select a location for your new refrigerator away from any heat sources. Allow a free flow of air through the front base grille. 5. Your model should not be installed where the room temperature because it will not run frequently enough to maintain proper temperature in the freezer.
Page 4
(Models JRS226, Your refrigerator has been designed so that black door panels, custom cabinet panels (up to 1/4"thick) or any custom panel (up to .060" thick) can be easily installed. To install either custom cut black door panels or decorator trim kit for custom cabinet panels, ord- er the appropriate kit listed below.
Cabinet Surfaces At times, the front surfaces of your refrigerator cabinet may be warm to the touch. This is a normal function of your refrigerator. This feature prevents moisture from condensing on the outside of your refrigerator during humid weather. This condition may be noticea- ble when you first start your refrigerator, during hot weather, and during excessive or lengthy door openings.
Page 6
The Sealed Crisper drawer slides out for easy access to foods stored within. It is com- pletely removable for cleaning or for use elsewhere also serves as a refrigerator storage shelf. To remove the cover for cleaning, lift the front edge and pull straight out.
Cover (Model JRSD226 h cover is located on one of the large adjustable shelves on the refrigerator door. It pro- vides short term storage of fresh foods. Keep the lid tightly closed to insure freshness of your foods. Egg Caddy Your model has an egg caddy that fits securely on a door shelf.
The colder the freezer section, the more ice is produced. We suggest you start with your refrigerator and freezer controls at their mid settings. In most cases, this is satisfac- tory. If the door to the refrigerator or freezer is opened frequently or temperatures kitchen are abnormally high, a colder setting may be necessary.
Page 9
The icemaker should be turned off (arm up) when: Ice storage bin is to be removed for extended period of time. Refrigerator is not to be used for a considerable off the water supply to the ice maker in this instance, if practical.
Page 10
When you first operate your dispenser or after recon- necting water to your refrigerator, air will escape from the dispenser for a few minutes before water begins to flow. Draw 10 glasses of water and empty them in the kitchen sink.
Page 11
Your refrigerator can be rolled out for cleaning. Turn the levelers, at each front corner of the cabinet, counterclockwise until they turn freely.Then pull the cabinet straight out. Note: If you have an automatic ice maker installed, we recommend that you turn off the water supply before moving the cabinet.
Page 12
To replace base grille, line up the spring clips Condenser The condenser should be cleaned twice a year. If you move your refrigerator out for cleaning, the condenser can be cleaned through the rear access opening. Thoroughly vacuum dirt and lint from the open end of the condenser.
If you will be gone for a month or less, leave the control knob at its usual setting. During longer absences, (a) remove all food, (b) disconnect from electrical outlet, (c) clean the refrigerator thoroughly, including defrost pan, (d) leave doors open to prevent odor formation.