Operating Controls
7
Function keys
.04.03
If a function is on, this is always indicated by the correspondingly lit LED. Detailed explana-
tion of functions:
Thread machine
Chain cutter on/off (with subclasses 2 and 3).
Stacker on/off (with subclass 3)
Label feeder on/off (with subclass 4).
Fill the unit
Sew until the unit is empty (with subclasses 2 and 3)
F1 key
F1
F2 key
F2
F3 key
F3
18
The sewing head is moved back so that the machine can be threaded.
The thread tension is opened when threading.
This key corresponds to number 1 when entering the code number.
The chain is separated at the start and end of the pocket during the sewing operation.
This key corresponds to number 2 when entering the code number.
The sewn pockets are automatically stacked during the sewing operation if the cover of
the stacker is closed.
This key corresponds to number 3 when entering the code number.
This key corresponds to number 4 when entering the code number.
The unit is fi lled after pressing the key. FILL 3538 appears on the display.
Now pocket blanks must be fed in until the unit is completely fi lled. The unit is fi lled
when the length entered in parameter 503 is reached. If the unit is fi lled, it automatically
switched to the sewing operation.
This key corresponds to number 5 when entering the code number.
The unit sews until all pocket blanks are sewn after pressing the key.
EMPTY 3538 appears on the display. The unit automatically switches to ready for sewing
when the unit sews until it is empty.
This key corresponds to number 6 when entering the code number.
This key is reserved for special functions.
This key corresponds to number 7 when entering the code number.
This key is reserved for special functions.
This key corresponds to number 8 when entering the code number.
This key is reserved for special functions.
This key corresponds to number 9 when entering the code number.