Brick Installation - Regency F5100 Owners & Installation Manual

Firebrick is included to extend the life of your stove and radiate heat more evenly. Install all fi rebricks per the diagram below and place in their correct positions.
Do not use a grate.
1. Remove box of fi rebricks from inside unit.
2. Remove Lyotherm sheet from mailer tube and install on base of fi rebox as shown below.
3. Order of fi rebrick install:
a) Rear Firebrick
b) Firebox fl oor - install brick over Lyothern Sheet
c) Right and left side Firebricks
1
2
AD brick
5 3
NOTE: The "AD" brick covers the Ash Dump hole that is used when the Ash Drawer Kit is installed.
F5100 Regency Freestanding Woodstove

BRICK INSTALLATION

4 2
Lyotherm sheet
Fire bricks
# Size
1 4-1/2" x 9"
2 2" x 9"
3 3-1/2" x 4-1/2"
4 1-3/4" x 4-1/2"
5 2" x 7"
Final Install
INSTALLATION
19