Firebrick is included to extend the life of your stove and radiate heat more evenly. Install all firebricks per the diagram below and place in their correct positions.
Do not use a grate.
1. Remove box of firebricks from inside unit.
2. Remove Lyotherm sheet from mailer tube and install on base of firebox as shown below.
3. Order of firebrick install:
a) Rear Firebrick
b) Firebox floor - install brick over Lyothern Sheet
c) Right and left side Firebricks
AD brick
5
4
NOTE: The "AD" brick covers the Ash Dump hole that is used when the Ash Drawer Kit is installed.
FIREPLACE PRODUCTS INTERNATIONAL
3RD ANGLE
TOLERANCES UNLESS
PROJECTION
OTHERWISE STATED
±1°
ANGULAR =
PART :
±0.031
DIMENSIONS =
MAT'L :
INSIDE BEND RADII =
DO NOT
UNITS IN INCHES
SCALE
REV.
042-960
-
PART
CURRENT REVISION
NO.
PREVIOUS REVISION
1
QTY.
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.