Accessories - Yamato VG3511-8F Instruction Manual

2. Installation

2.8 Accessories

Install the accessories as the suction pipe(rear), the suction pipe support, the flexible hose and the speed con-
troller on the machine as follows:
(1) Install the speed controller ⑧ in the screw hole on the bottom of the lower knife holder.
(2) Insert the suction pipe(rear) ① into the hole of the bottom of the lower knife holder bracket ② and fix them
with the screw ③ .
(3) Remove the screws ④ at the rear of the machine frame.
(4) Install the suction pipe support ⑤ with the screws ④ at the place the screws ④ were located.
(5) Install the suction pipe(rear) ① on the suction pipe support ⑤ .
(6) Insert the flexible hose ⑦ fitted with the hose band ⑥ into the suction pipe(rear) ① . Then, fix them with
the hose band ⑥．
⑦
⑥
①
Fig. 2-12
If tightened the screw ③ excessively, the suction pipe(rear) ① may be deformed. That may be difficult to remove
it when clogged with chips.
VG3511-8F
④
⑤
ＮＯＴＩＣＥ
②
Ａ
8
③
⑧