Hemming Guide(Left) (; Trimming Width Of Fabric - Yamato VG3511-8F Instruction Manual

5.9 Hemming guide(left)
(1) Loosen the screw ② of the hemming guide(left) ① .
(2) Align the right on the guiding part of the hemming
guide(left) ① with that of the upper knife ③ .
(3) Tighten the screw ② securely.
SUPPLEMENT
See "7.1 Adjusting trimming position of fabric "to ad-
just the right-and-left position of lower fabric.

5.10 Trimming width of fabric

Install or remove the folder spacer ⑤ on the guiding part
of the hemming guide(left) ① to change the trimming width
of a fabric.
When sewing with the folder spacer ⑤ , the trimming width
is 3.0 ㎜ .
When sewing without it, the trimming width is 5.0 ㎜ .
Remove the screw ④ to remove the folder spacer ⑤ .
③
aligned
Fig. 5-12
⑤
④
①
Fig. 5-13
17
5. Proper operation
①
②
VG3511-8F