Spouts Supplied With The Machine; High Raised Group Spouts Supplied With The; Machine; Long Coffee Nozzle Supplied With The Machine - Gaggia Deco Tecnichal Service Manual

English
7.4 Spouts supplied with

machine.

4 types of spouts are supplied with the
machine to have single or double coffee
brewings.
The figure on the side shows the various
possible distances from the cup holder
grill (H) in relation to the different types of
spouts assembled on the filter holder.
7.5 High raised group spouts
s u p p l i e d w i t h t h e
machine.
2 types of spouts are supplied with the
machine.
The figure on the side shows the va-
rious possible distances in relation to
the different types of spouts and cup
holder grills used (cup holder grill H for
espresso coffee - cup holder grill H1 for
American coffee).
7.6 Long coffee nozzle supplied with the
machine
The machine is equipped with a gigleur (1 per
unit) with a Ø0.6mm size through passage (Code
WGA26G0074/01).
2 gigleurs are supplied together with the machine (complete
with gasket) providing a Ø0.8mm through passage (Code
WGA26G0073/01) if a higher coffee delivery speed is
required in the case of weak coffees. The gigleur is positio-
ned in the heat exchanger feed fitting (1 per unit).
fig. 8
45
8 - OPERATION / USE AND
USER PROGRAMMING
INTRODUCTION
The following operations can be monitored by using the
programming software:
- management of 2 – 3 - 4 coffee units
- controlling four different coffee doses for each unit (Model "D").
- controlling the tea doses (hot water)
- simultaneous operation of coffee and tea units
- volumetric control of the coffee doses (Model "D")
- timer control of the tea doses (Model "D")
- simulated doses programming (Model D")
- filling level control and management
- system supervision via the alarms
- continuous, time out delivery and other functions
- series connection with accounting devices
- back-lit LCD 16 x 2 display to view the functional status.
Warning! The display shows the last selection made.
93
106
106
96