Coffee Dose Programme - Gaggia Deco Tecnichal Service Manual

English
COFFEE keyboard symbols:
T1 - Single espresso coffee
T2 - Double espresso coffee
T3 - Single weak coffee
T4 - Double weak coffee
T5 - Programming / Continuous
TEA keyboard symbols:
T6 - 1 Tea dose
T7 - 2 Tea doses
Model "E" keys symbols:
T8 - Coffee (Units 1÷4)
T7 - Tea
8 . 1 P R O G R A M M I N G C O F F E E
DOSES
The coffee dose quantities can be changed
(using the volumetric control) and the settings
can be memorised by proceeding as follows:
- press key T5 (on the keyboard referring to
unit 1) and continue to press for more than
5 seconds and verify that all the keyboard
leds are illuminated. In this case all units
are programmed, (using the keyboard refer-
ring to unit 1), whereas by pressing key T5
of another unit only the unit that has been
selected is programmed.
WARNING! The settings on unit 1 (using the
first keyboard), are automatically copied also
on all the other units.
Press the key corresponding to the dose to be
programmed within 30 seconds (programming
time out), (for example: key T1).
46
Programming
Selection in 30secs.
T5