Tea Dose Programme; Hot Water - Gaggia Deco Tecnichal Service Manual

English
8.2 Programming tea doses

(hot water)

The timed quantities for the tea doses can
be changed by following the sequence
described:
Press key T5 on the coffee 1 unit and
continue pressing for more than 5 seconds
and verify that all the leds on the keyboard
are illuminated.
Press key T6 Tea 1 or key T7 Tea 2 within
30 seconds (programming time-out).).
The dose of tea water is delivered in this
way.
Press key T6 or key T7 again after the de-
sired dose has been obtained to interrupt
the water delivery. In this way the new
delivery time for the Tea water is stored
in the memory.
Press key T5 again to switch the machine
to standby mode in order to exit the pro-
gramming phase.
48
Programming
Selection in 30 secs.
Tea
Programming
T6
T7
T5