DPH-C160S – DECT Cordless VoIP Phone – User Manual
6. Select "Obtain an IP address automatically" by clicking once in the
circle. Click the OK button.
Your comput
er is now ready to use the Router's DHCP server.
Please Note:
if you need to assign a specific IP address to your PC, you can
select
Use the following IP address: and enter the IP address,
mask, and
Default gateway addresses in the corresponding fields.
Windows 2000 IP Protocol
First, check for the IP protocol and, if necessary, instal
1. In the Windows task bar, clic
and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the
Local Area Connection icon, and then select Properties.
4. The Local Area Connection Properties dialog box displays with a list
of currently installed network components. If the list includes Internet
Protocol (TCP/IP), then the protocol has already been enabled, skip
ahead to Configure Windows 2000 for DHCP.
5. If Internet Protocol (TCP/IP) does not display as an installed
component, click Install.
6. In the Select Network Component Type dialog box, select Protocol,
and then click Add.
Select Obtain an IP address
automatically in the Internet
Protocol (TCP/IP) Properties window.
l it:
k the Start button, poi
Subnet
nt to Settings,
Page 63 of 67