Table of Contents
Advertisement
DPH-C160S – DECT Cordless VoIP Phone – User Manual
Turning the Handset On and Off
When you place the handset in the charger to charge, it is automatically turned
on. The handset is now ready for use. To turn the handset off, press the Mute
button until "Good-Bye" appears in the handset's LCD display, as shown
below.
Good-Bye
The handset will then turn off and the display will become blank.
Please note: nothing will appear in the handset's LCD display when the
battery power is very low.
When you first turn on the handset, the initial screen displays the handset
number and the base number or base name (if you have a name saved for the
base).
In the case shown above, the display indicates that this is handset 1 (HS 1)
and base 1 (Base 1). When the DPH-C160S has contacted the SIP server and
becomes registered, the name of the SIP service provider will be displayed, as
shown below. In addition, the Power/Status LED on the top edge of the DPH-
C160S's Charging Base will stop blinking and glow a constant green when the
telephone has registered with the SIP server and is ready to make and receive
VoIP telephone calls.
Page 13 of 67
Advertisement
Table of Contents
