Table of Contents
Advertisement
DPH-C160S – DECT Cordless VoIP Phone – User Manual
Receiving a Call
When an incoming PSTN or VoIP telephone call is detected, the handset will
ring and the L1 icon will be displayed in the LCD. If the caller can be identified,
the caller's number or Buddy List entry will be displayed. If the caller's
telephone number is currently stored in the handset's phone book, the caller's
name will be displayed along with the telephone number.
To answer the call, simply pick the handset up from the charger base or press
the PSTN Dial Tone button, if the handset is not in the charger.
To end the call, either press the On-hook button or replace the handset on the
charger.
Incoming Call LED
This red LED will flash to
indicate an incoming
PSTN or VoIP telephone
call.
IP
Press this button to
answer an incoming
VoIP telephone call.
PSTN Dial Tone
Press this button to
answer an incoming
PSTN or VoIP telephone
call.
If the AnyKey Answer function is activated, you can press any button on the
keypad to answer an incoming telephone call.
On-hook
Press this button to end a
telephone call. You can
also simply place the
handset in the charger
base to end any
telephone call.
This will end both a PSTN
and a VoIP telephone call.
Page 16 of 67
Advertisement
Table of Contents
