Download Print this page

Advertisement

USER MANUAL
Table of Contents
DPH-300S
Dual Mode Cordless VoIP Phone
D-Link DPH-300S User Manual
1

Advertisement

   Related Manuals for D-LINK DPH-300S

   Summary of Contents for D-LINK DPH-300S

  • Page 1

    USER MANUAL Table of Contents DPH-300S Dual Mode Cordless VoIP Phone D-Link DPH-300S User Manual...

  • Page 2: Table Of Contents

    FEATURES............6 INTRODUCTION ..........7 HARDWARE OVERVIEW ........9 FACTORY RESET ..........11 NETWORK CONNECTIONS......13 CONFIGURATION..........14 WEB-BASED CONFIGURATION UTILITY ..14 SETUP ..............16 SETUP WIZARD..........16 USING THE CONFIGURATION PAGE....25 CHECK YOUR IP ADDRESS ......44 STATICALLY ASSIGN AN IP ADDRESS ...45 D-Link DPH-300S User Manual...

  • Page 3: Package Contents

    Ethernet Cable (the DPH-300S’s Ethernet port is Auto-MDIX) • Note: Using a power supply with a different voltage rating than the one included with the DPH-300S will cause damage and void the warranty for this product. System Requirements Broadband Internet connection •...

  • Page 4

    D-Link Corporation / D-Link Systems, Inc. does NOT assume any liability for death, injury or damage to equipment or property resulting from the use of this phone in a manner inconsistent with the use for which it was intended. D-Link Corporation / D-Link Systems, Inc, will not be liable for consequences that may result from tampering with the batteries or charger-base or consequences resulting from their use thereafter.

  • Page 5

    ** BATTERY CHARGING NOTE ** Before you connect your DPH-300S to the Internet, your network, or your PC, you should install the batteries in the handset and place it on the base station for charging. The batteries need to be charged for at least 12 hours before the first time you use the DPH-300S.

  • Page 6: Features

    Delete single or all records in phonebook • Redialing and preparation dialing functions • Page on base unit to look for the handset easily • Clicking key tone on or off • GAP compliant • Speakerphone • D-Link DPH-300S User Manual...

  • Page 7: Introduction

    Before you start, your new DPH-300S Dual-mode Cordless Phone will require a connection to the Internet to function. The connection may be directly through a Cable or DSL modem, or it may be through a broadband router. Your DPH-300S phone will enable you to make VoIP (Voice over Internet Protocol) telephone calls −...

  • Page 8

    Section 1 - Product Overview The DPH-300S phone allows you to make and receive calls from both ordinary phone service and from IP telephony over the Internet. The basic diagram shown above outlines how your new dual-mode IP phone works.

  • Page 9: Hardware Overview

    Power Adapter Connect your 12V DC, 1.25A power LAN 1 Port adapter here. Connect the Ethernet cable from a computer on your LAN to this port. Phone Connection Connect to your phones using standard phone cabling. D-Link DPH-300S User Manual...

  • Page 10

    VoIP server. LAN 2 A solid LED indicates the A solid LED indicates an Ethernet DPH-300S has registered with a link has been established. The VoIP server and is ready for a call. LED will blink when there is activity...

  • Page 11: Factory Reset

    7) Complete! The DPH-300S should have had the following factory default settings restored: IP Address; Call Logs (all). 8) Note that if your DPH-300S is still connected to the Internet, the auto-provisioning process should repeat itself after the factory reset, and the phone should return to a ready-state showing “D-Link”...

  • Page 12: Before You Begin

    The DPH-300S needs to be setup before use. You can use the Quick Installation Guide (included with the DPH-300S) to perfor m the hardware installation. There is an easy to use setup Wizard built-in to the DPH-300S to accomplish the IP address setup. You will need to run the Wizard and enter your Internet connection information in order to use your phone for IP calling only if you do not have access to Dynamic IP Addressing.

  • Page 13: Network Connections

    Installation Network Connections Connection using a Multi-port Router The DPH-300S can either be connected to an available port on a Cable/DSL modem multi-port router, with other devices connected to their own ports (as below). Multi-port Router Connection Connection using a Single-port Modem...

  • Page 14: Configuration

    LAN. This DHCP server is often contained in a multi-port Ethernet router. See your router’s documentation to determine the addresses assigned by its DHCP server. If you do not know the IP address assigned to the DPH-300S (or you do not yet have a multi-port Ethernet router) you can connect to the DPH-300S by the following method: •...

  • Page 15

    If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. The Home > Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. D-Link DPH-300S User Manual...

  • Page 16: Setup

    Configuration SETUP This chapter is concerned with using your computer to configure the LAN connection. The following chapter describes the various windows used to configure and monitor the DPH-300S. Setup Wizard SETUP Click on the Run Wizard button to launch the Setup Wizard.

  • Page 17

    Configuration WELCOME TO DPH-300S SETUP WIZARD Dynamic IP Address (using DHCP) is both the default option, and the most commonly used method to assign devices on a LAN IP address information when connecting to a broadband modem or multi-port Ethernet router/DHCP server.

  • Page 18

    Configuration CHANGE YOUR DPH-300S PASSWORD The default password is "admin". In order to secure your network, please modify the password. Note: Confirm Password must be same as "New Password". Of course, you can click on the Skip to ignore the step.

  • Page 19

    SELECT INTERNET CONNECTION TYPE Please select the connection type that your ISP uses. Of course, you can modify the information later, if necessary. Click on the Next button to go to the next Setup Wizard window. D-Link DPH-300S User Manual...

  • Page 20

    It is not recommended that you change the default MAC address unless required by your ISP. Primary/Secondary DNS – Enter a DNS Address if you wish not to use the address provided by your ISP. D-Link DPH-300S User Manual...

  • Page 21

    Primary DNS Address − Input the DNS address provided from your router configuration settings, ISP, or network administrator. Secondary DNS Address − Input a secondary DNS address (optional) provided from your router configuration settings, ISP, or network administrator. D-Link DPH-300S User Manual...

  • Page 22

    ISP. User Name − Enter your PPPoE User Name as provided by your ISP. Password − Enter your PPPoE Password. Retype Password − Retype your PPPoE Password to confirm. Click the Connect button to continue. D-Link DPH-300S User Manual...

  • Page 23

    Authentication Name – The Username used to access your SIP server and your VoIP service provider. Password – The Password used to access your SIP server and your VoIP service provider. Retype Password – Retype your password to confirm and click Apply. D-Link DPH-300S User Manual...

  • Page 24

    Click the Restart button to save the settings and restart the router. You will now be able to connect the DPH-300S to the Internet so it can contact the SIP server and make telephone calls over the Internet using VoIP technology.

  • Page 25: Using The Configuration Page

    This DHCP server is often contained in a multi-port Ethernet router. See your router’s documentation to determine the addresses assigned by its DHCP server. If you do not know the IP address assigned to the DPH-300S (or you do not yet have a multi-port Ethernet router) you can connect to the DPH-300S by the following method: Connect the WAN port on the DPH-300S directly to the Ethernet port on your PC.

  • Page 26

    Primary DNS Address − Input the DNS address provided from your router configuration settings, ISP, or network administrator. Secondary DNS Address − Input a secondary DNS address (optional) provided from your router configuration settings, ISP, or network administrator. D-Link DPH-300S User Manual...

  • Page 27

    ISP. Password − Enter your PPPoE Password. Primary / Secondary DNS Addresses − Enter the DNS addresses provided by your ISP. Retype Password − Retype your PPPoE Password to confirm. Click the Connect button to continue. D-Link DPH-300S User Manual...

  • Page 28

    Outbound Proxy Domain Name – You can choose to enable the Outbound Proxy Domain Name by choosing enabled in the drop-down menu. Outbound Proxy Port – Enter the TCP/UDP port number in use by your ISP for the Outbound Proxy server. D-Link DPH-300S User Manual...

  • Page 29

    VoIP. Display CID – You can choose to display the Caller ID information collected from incoming VoIP calls. Timer T2 – You can choose the length of the T2 timer. The default is 4 seconds. D-Link DPH-300S User Manual...

  • Page 30

    SIP device to increase the session expiration value to match the minimum session expiration value. Session Expires Refresher - This determines which side of an expired call session will initiate the session refresh. uac – specifies D-Link DPH-300S User Manual...

  • Page 31

    Configuration the Caller side will initiate the session refresh. uas – specifies the Call receiver (the “Callee”) will initiate the session refresh. D-Link DPH-300S User Manual...

  • Page 32

    This Proxy IP address is only needed if the Provisioning Function is set to Enable & Use Proxy. Proxy Port Number – Enter the port number the Proxy Server will use to make the connection in this field. D-Link DPH-300S User Manual...

  • Page 33

    Authentication Name – The Username used to access your SIP server and your VoIP service provider. Password – The Password used to access your SIP server and your VoIP service provider. Retype Password – Retype your password to confirm and click Apply. D-Link DPH-300S User Manual...

  • Page 34

    Phone Number – The telephone number assigned to the User Agent. User IP Address – Enter the peer’s IP address in the format name@x.x.x.x. Port – This selects the port number the router will listen to when determining when calls are being made. uSER D-Link DPH-300S User Manual...

  • Page 35

    This lets the router reduce the bandwidth that a call uses by not transmitting “silent Packets” when you are not speaking. Country Code – You can select the default country code for your area. D-Link DPH-300S User Manual...

  • Page 36

    Making a Call to the PSTN (regular telephone network) If you have connected your PSTN telephone line to the DPH-300S’s Base, you can make a telephone call to any regular telephone using the PSTN − normal telephone usage charges will apply −...

  • Page 37

    Press this button button to end If you have connected your PSTN telephone line to dial a a telephone to the DPH-300S’s Base, you can make a telephone call. You can telephone call to any regular telephone using the number (over the...

  • Page 38

    Making a Call Making a VoIP Call to another DPH-300S or Peer number On Hook Press this button You can dial another Peer user’s number directly. Press this after you have Simply enter the number − 66990011, for example button to end dialed the Peer’s...

  • Page 39

    PSTN Dial Tone Press this button to dial a telephone number (over the regular telephone line (PSTN)). You will hear the familiar dial tone − and then the handset will dial the telephone number as you entered it. D-Link DPH-300S User Manual...

  • Page 40

    The call then be continued using the handset normally. PSTN Dial Tone Press and hold this button to activate the speakerphone function for PSTN calls. To deactivate the speakerphone function, press and hold this button a second time D-Link DPH-300S User Manual...

  • Page 41

    Scroll Up will Scroll Down button during a telephone call. increase the volume level. Scroll Down Press these buttons to adjust the earpiece volume level during a telephone call Scroll Down will decrease the volume level. D-Link DPH-300S User Manual...

  • Page 42: Troubleshooting

    Far side of the call is not registered with the Network Manager. If you are calling someone who has an videoconference d e v i c e i n a d d i t i o n t o a DPH-300S, you may have to make direct IP calls to them.

  • Page 43

    Port forward the appropriate ports to the phone. The phone needs ports 1720 (TCP) and ports 15328-15333 (TCP and UDP) open to „ function properly. See the section Opening Ports on Routers and Gateways on page 58, or consult your router’s documentation or your network administrator for help on doing this. D-Link DPH-300S User Manual...

  • Page 44: Check Your Ip Address

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 45: Statically Assign An Ip Address

    Windows® 2000 - From the desktop, right-click on the My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click on the Properties.

  • Page 46: Technical Specifications

    CODEC G.711 (A-law and U-law) Operating Temperature 0° to 40°C G.726 Storage Temperature -10° to 55°C G.729A Operating Humidity Range 5 to 95%, Non-condensing iLBC Echo Cancellation G.168 Configuration/Management: DHCP (Dynamic Host DHCP Client (RFC2131) Configuration Protocol) D-Link DPH-300S User Manual...

  • Page 47

    Sweden dlink.se Turkey dlink.com.tr Denmark dlink.dk Israel dlink.co.il Norway dlink.no Latin America dlink.cl Finland dlink.fl Brazil dlinkbrasil.com.br Spain, Portugal dlink.es South Africa d-link.co.za Czech Republic dlink.cz Russia dlink.ru Switzerland dlink.ch China dlink.com.cn Taiwan, HQ dlink.com.tw D-Link DPH-300S User Manual...

  • Page 48

    Contacting Technical Support Notices Trademarks: D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners. Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the...

  • Page 49

    • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. D-Link DPH-300S User Manual...

Comments to this Manuals

Symbols: 0
Latest comments: