Advertisement
(5)
After a short time, the value on the 7-segment LED becomes stable and all the "density LEDs"
are turned off.
(6)
Check if the value on the 7-segment LED is within the range of 232 to 248 (i.e. the output voltage
range of the auto-toner sensor is 2.32 V to 2.48 V.).
(7)
If the value is not within the range of 232 to 248, press the reproduction ratio buttons ([25%] /
[200%]) to adjust the value manually.
(8)
Press the [INTERRUPT] button.
The drum, developer unit, etc. are stopped and the following is displayed on the 7-segment LED.
(9)
Turn the power OFF.
(10) Install the toner cartridge.
e-STUDIO181/211
ADJUSTMENT
[INTERRUPT]
Fig. 3-4
3 - 2
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Hide quick links:
Advertisement
Troubleshooting
