Download Print this page

Toshiba e-STUDIO181 Service Handbook page 193

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO181:

Advertisement

18.Image dislocation in feeding direction
Defective area
Scanner/Printer
adjustment
Registration roller
Registration clutch
Pre-registration guide
Feed system
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 5-19
Step
Check items
1
Have the printed images been
dislocated in the same manner?
2
Is the registration roller dirty, or the
spring detached?
3
Is the registration roller working
properly?
4
Is the registration clutch working
properly?
5
Is the pre-registration guide installed
properly?
6
Is the aligning amount proper?
5 - 39
Prescription
Adjust the position of the leading
edge of paper in the Adjustment
Mode.
Clean the registration roller with
alcohol.
Securely attach the springs.
Adjust or replace the gears if they are
not engaged properly.
Check the registration clutch, and
replace them if necessary.
Install the guide properly.
Adjust the aligning amount.
e-STUDIO181/211
TROUBLESHOOTING
5

Hide quick links:

Advertisement

loading

This manual is also suitable for:

E-studio211