Toshiba e-STUDIO181 Service Handbook page 197

22.Blotched image
Defective area
Paper
Separation
Transfer
High-voltage transformer
(Transfer charger)
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 5-23
Step Check items
1 Is the paper type corresponding to its
mode?
2 Is the paper too dry?
3 Is the output from the separation
charger too high?
4 Is the transfer charger case dirty?
5 Is the transfer charger wire dirty?
6 Is the output from the high-voltage
transformer normal?
5 - 43
Prescription
Check the paper type and mode.
Change the paper.
Adjust the output, from the
separation charger.
Clean the transfer charger case.
Clean the transfer charger wire.
Adjust the output. Replace the
transformer if necessary.
e-STUDIO181/211
TROUBLESHOOTING
5