Toshiba e-STUDIO181 Service Handbook page 127

(4) Loosen the hinge screws at the front side.
(5) Position the pins with the holes on the ADF
by moving it so that the pins fit into the holes
when the ADF is closed.
(6) Tighten the left-hand hinge screw at the rear
side.
(7) Install the bracket.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-43
Fig. 3-44
Fig. 3-45
Fig. 3-46
3 - 45
3
e-STUDIO181/211
ADJUSTMENT