18.2.5 Removing the fan
1. Carry out step 18.1.1;
2. Remove the air gas manifiold as in
18.2.1 (Fig. 66);
Fig. 66
18.2.6 Removing the gas valve
1. Carry out step 18.1.1;
2. Remove the air gas manifiold as in
18.2.1 (Fig. 69);
Fig. 69
5. Remove the gas valve from the
venturi. (Fig. 72);
6. Reassemble in reverse order;
7. The gas valve settings will need to
be adjusted (see Section 14.3 page
28);
8. Reinstate the gas supply and test for
tightness on reassembly.
Fig. 72
46
3. Unscrew the two screws from the
venturi J and remove with the gas
valve (Fig. 67);
J
3. Unscrew the three screws L on the
air/gas pipe and remove (Fig. 70);
L
4. Unscrew the three screws K on the
air/gas pipe and remove (Fig. 68);
5. Reassemble in reverse order.
K
Fig. 67
4. Unscrew the three screws holding
the gas valve on the venturi (Fig.
71);
Fig. 70
Fig. 71
Fig. 68