Remote Control - Philips PPF 470 User Manual

Remote control

You can also control the answering machine functions on your
fax from any telephone using tone dialling. Before you can use
remote control you have to enter an access code in function
52 (this code will also be used for function 55 Forwarding).
Preparing your fax machine for remote access
1 Select MENU 52 and press OK.
2 Enter a four digit code.
3 Press OK. The code is now stored.
Remote access of the answering machine
1 If you want to listen to the messages recorded from
another telephone, call your fax machine and wait for the
answering machine to play the message.
2 Enter the four-digit code. The outgoing message will be
interrupted and you will hear a confirmation tone. The
new messages will be played back. If no new messages
have been recorded, you will hear a second confirmation
tone.
3 Then you can enter commands as usual or terminate the
remote control by replacing the handset.
Der Anrufbeantworter
Overview of commands
1 The message you are just listening to will be repeated.
2 Your messages will be played back.
3 Move to the next message.
4 Record a new outgoing message. If you press 4 again after
two confirmation tones, you will hear a long confirmation
tone. Record the new outgoing message and finish with 4.
5 The current outgoing message will be replayed.
6 The current message will be deleted. If you press 6 after
having listened to all messages, all messages will be deleted. In
both cases you will hear a confirmation tone after the first
time you press the key. Press 6 again within five seconds to
execute the deleting command.
7 Switch answering machine off.
8 The current command will be interrupted.
9 Switch answering machine on.
27