Table of Contents
Advertisement
The intelligent fax switch enables you to phone and fax
from the same telephone connection and use additional
devices. The fax switch separates fax and voice messages.
For example, it can receive fax messages silently, i. e.
without ringing to avoid causing a disturbance.
The operating modes S and M for day and night
operation allow you to decide on different modes during
the day and at night; how often the machine should ring
prior to receipt of faxes or before the answering machine
is turned on.
Example:
During daytime it is assumed that calls should ring.
After a set time the fax reception is turned on and
messages can be left on the (internal or external)
answering machine. At night it is assumed that distur-
bances are minimised. Faxes are then received silently
and calls ring more quietly.
You may change-over the operating mode between S
and M of your fax machine automatically using the
timer function U. The integral clock ensures that your
machine is changed over at 10 pm to M and at 6 am to
S. Of course you may adjust these times to suit your
own requirements. The display allows you to check the
current operating status. You change-over between S
and M by briefly pressing S/M until the display shows
the required symbol.
Setting the Mode SM
with built-in answering machine
Display
TAM RINGS:
FAX RINGS:
RINGER VOL.:
LISTEN-IN:
1 Select function 31 (Day) by pressing MENU and numbers
3 and 1. Confirm with OK.
2 Select number of rings with u before your answering
machine will be activated.
SM
SM
SM
SM
Possible settings
0, 1, 2, 3, 4, 5, 6,
7, 5/2
0, 1, 2, 3, 4, 5,
MANUAL RECEPTION
Low, Medium,
High
ON, OFF
TAM RINGS:
5/2
4 Fax switch
Die Faxweiche
3 Confirm your entry with OK.
4 Now enter the number of ringing signals, after which the
automatic fax switch should accept the call and separate faxes
from voice messages. Although the caller will continue to
hear slightly different ringing tones after this time, charges
will already accrue.
5 Confirm your entry with OK.
6 Using </>, determine the ringer volume when receiving a
call. Press OK.
7 Select with </> if the caller should be heard while leaving a
message.
8 Confirm with OK. To activate mode M select MENU 32
(Night) and repeat steps 2 to 7.
without built-in answering machine
Display
TOTAL RINGS:
FAX RINGS:
RINGER VOL.:
1 Select function 31 (Day) by pressing MENU and numbers
3 and 1. Confirm with OK.
2 Using u, set the total number of rings before the fax
reception commences.
3 Confirm your entry with OK.
4 Now enter the number of ringing signals after which the fax
switch should accept the call and separate faxes from voice
messages. Although the caller will continue to hear slightly
different ringing tones after this time, charges will already
accrue.
5 Confirm your entry with OK.
6 Using u, determine the ringer volume when receiving a
call. Press OK.
15
FAX RINGS:
5
RINGER VOL.:HIGH
LISTEN-IN:
ON
Possible settings
0, 1, 2, 3, 4, 5,
6, 7
0, 1, 2, 3, 4, 5,
MANUAL RECEPTION
Low, Medium,
High
TOTAL RINGS:
5
FAX RINGS:
5
RINGER VOL.:HIGH
Advertisement
Table of Contents
