Table of Contents
Advertisement
TG6411-6421NZ(e).book Page 25 Tuesday, March 31, 2009 1:07 PM
5
Select the handset(s) you want to
cancel by pressing the desired
handset number. i M
L The selected handset number(s)
flashes.
L To cancel a selected handset
number, press the number again.
The number stops flashing.
6
{V}/{^}: "Yes" i M
L A confirmation tone sounds as
each handset number
disappears.
L The handset does not beep when
cancelling its own registration.
7
{ih}
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Contact your
Panasonic dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1
8 (middle soft key)
2
{V}/{^}: "Base Unit Setup" i
M
3
{V}/{^}: "Repeater" i M
4
{V}/{^}: Select the desired setting.
i M i {ih}
Note:
L After turning the repeater mode on or
off, w flashes on the handset
momentarily. This is normal and the
Programming
handset can be used once w stops
flashing.
25
Advertisement
Table of Contents
