Table of Contents
Advertisement
Making/Answering Calls Using the Base Unit
Making mobile calls
Important:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 mobile lines,
or the landline and 1 mobile line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
mobile lines, or the headset and 1 mobile
line).
R Before making calls, confirm that the
corresponding MOBILE indicator on the
base unit lights up (page 14).
1
Dial the phone number.
R To correct a digit, press MCLEARN.
2
Press MMOBILE 1N or MMOBILE 2N.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 44), press MMOBILEN
handset. a MbN: Select the desired
mobile phone. a MSELECTN a Press
MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
*1
The call is taken when:
– only 1 mobile phone is paired.
– a specific line is set to make mobile
calls (page 19).
Adjusting the speaker volume
Press MDN or MCN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and mobile lines).
Making a mobile call using the redial
list
The last 10 phone numbers dialled are stored
in the redial list (each 48 digits max.).
1
MREDIALN
26
2
MbN: Select the desired phone number.
3
Press MMOBILE 1N or MMOBILE 2N.
Erasing a number in the redial list
1
MREDIALN
2
MbN: Select the desired phone number.
a MERASEN
3
MbN: "Yes" a MSELECTN
4
MEXITN
Making landline calls
1
Dial the phone number.
R To correct a digit, press MCLEARN.
2
MZN
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
*1
on the
– Press M
MZN on the base unit with the call
sharing mode on (page 44).
– If the handset is on the base unit, simply
lift it.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 48 digits max.).
1
MREDIALN
2
MbN: Select the desired phone number.
3
MZN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 37).
N on the handset, then press
Advertisement
Table of Contents
