Table of Contents
Advertisement
TG6411-6421NZ(e).book Page 44 Tuesday, March 31, 2009 1:07 PM
Useful Information
Problem
I cannot operate the answering
system remotely.
While recording a greeting
message or listening to
messages, the unit rings and
the operation stops.
Liquid damage
Problem
Liquid or other form of moisture
has entered the handset/base
unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
44
Cause/solution
L You are entering the wrong remote access
code. If you have forgotten your remote
access code, enter the remote access code
setting to check your current code (page 31).
L Press each key firmly.
L The answering system is turned off. Turn it on
(page 32).
L You are using a rotary/pulse telephone. Try
again using a touch-tone phone.
L A call is being received. Answer the call and
try again later.
Cause/solution
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least
3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and
charge fully before use. If the unit does not
work properly, contact your nearest
Panasonic service centre.
Advertisement
Table of Contents
