Table of Contents
Advertisement
C
ONSUMABLES AND MAINTENANCE
This section explains how to replace consumable and maintenance items when due.
C
HECKING CONSUMABLE
At any time, you can check how much of each consumable/maintenance item is left by
using the appropriate menus. For example, enter the menu system and follow the path:
Configuration > Supplies Life > Cyan Toner
The percentage of Cyan Toner remaining is displayed on the LCD panel and the printer then
returns to the ready to print status.
R
EPLACEMENT INDICATIONS
The LCD panel provides messages to the effect that consumables/maintenance items are
running low or nearing end of life followed some time later by a message that replacement
is required. You should replace the item as soon as possible after this message is displayed
to avoid the possibility of print quality being compromised.
The paper feed rollers and the multi-purpose (MP) tray feed rollers do not have any
replacement warning messages. Recommended replacement: after approximately 120,000
A4 sheets.
R
EPLACING CONSUMABLES
Each consumable or maintenance item comes complete with its own installation details
which give full instructions on replacement. You are advised to follow these instructions
carefully.
Only use genuine Oki Original consumables to ensure the best
quality and performance from your hardware. Non-Oki Original
products may damage your printer's performance and invalidate
your warranty. Specifications subject to change without notice. All
trademarks acknowledged.
/
MAINTENANCE ITEM USAGE
/
MAINTENANCE ITEMS
CAUTION!
Consumables and maintenance > 33
Advertisement
Table of Contents
