Normal Mode With Triple Watch Or Dual Watch; Scan Mode Operation - Uniden Atlantis 275 Owner's Manual

Normal mode with Triple Watch or Dual Watch

If you activate Triple Watch while operating in normal mode,
the radio checks channels 9 and 16 every two seconds
and then returns to the current MRN or WX channel; with
Dual Watch turned on, the radio only checks channel 16
before returning to the current MRN or WX channel. The
radio will not check channels 9 or 16 while you are actively
transmitting; it waits until your transmission is finished and
then checks the channels.
Monitoring Channel 25
16 16 09
16
09 09
Every few seconds, the radio
checks channels 16 & 9.
Triple Watch on

SCAN MODE OPERATION

You can save channels into memory and then use scan
mode to monitor those channels from lowest to highest. If the
radio detects a signal on a channel, it stays on that channel
as long as the signal is received; when the signal stops, the
radio continues scanning.
When it detects a signal, the radio stays
on the channel until you press the ▲ or
▼ button or the signal stops.
Resume
scan
17
08 10 11 12 13
14 15
The radio scans about
5 channels in 0.5 seconds.
E-10
Uniden Atlantis 275 Radio Owner's Manual