Normal Mode With Triple Watch Or Dual Watch; Scan Mode Operation - Uniden Atlantis 275 Owner's Manual

Floating vhf marine radio

Hide thumbs Also See for Atlantis 275:

Table of Contents

Available languages

Normal mode with Triple Watch or Dual Watch

If you activate Triple Watch while operating in normal mode,

the radio checks channels 9 and 16 every two seconds

and then returns to the current MRN or WX channel; with

'XDO :DWFK WXUQHG RQ WKH UDGLR RQO\ FKHFNV FKDQQHO

before returning to the current MRN or WX channel. The

radio will not check channels 9 or 16 while you are actively

WUDQVPLWWLQJ LW ZDLWV XQWLO \RXU WUDQVPLVVLRQ LV ¿QLVKHG DQG

then checks the channels.

Monitoring Channel 25

Every few seconds, the radio

checks channels 16 & 9.

Triple Watch on

You can save channels into memory and then use scan

mode to monitor those channels from lowest to highest. If the

radio detects a signal on a channel, it stays on that channel

as long as the signal is received; when the signal stops, the

radio continues scanning.

When it detects a signal, the radio stays

on the channel until you press the

button or the signal stops.

The radio scans about

5 channels in 0.5 seconds.

E-10

Uniden Atlantis 275 Radio Owner's Manual

Resume

scan

Table of Contents

Table of Contents