Assembly Instructions - Kärcher SGP-302017 Operator's Manual

Spray
Gun
Safety
latch
High Pressure
Hose
STeP 1: Attach the high
pressure hose to the spray
gun using teflon tape on hose
threads.
dipStick
oil Window
STeP 4: Remove shipping cap
and install oil dipstick. Check
pump oil level by using dipstick
or observe oil level in oil win-
dow (if equipped). Use 30 wt.
non detergent oil.
Pump
Water Inlet
STeP 7: Connect the garden hose
to pump water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.

ASSeMbly INSTrUCTIoNS

Soap
Nozzle
STeP 2: Pull the spring-loaded collar
of the wand coupler back to insert your
choice of pressure nozzle.
Coupler Collar
High Pressure Hose
STeP 5: Connect the high pressure
hose to the pump discharge fitting. Push
coupler collar forward until secure.
Garden
Hose
9.800-079.0 • Rev. 4/08
Wand
Coupler
STeP 3: Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure it
is seated properly.
discharge fitting
STeP 6: Connect garden hose to the
cold water source.
Pressure
Nozzle
Wand
Coupler
Wand
Collar
Cold
Water
Source
Garden
Hose
7