Upper Cover Assy - Oki OKIPAGE 14i Maintenance Manual

Led page printer
Hide thumbs Also See for OKIPAGE 14i:
Table of Contents

Advertisement

3.3.1

Upper Cover Assy

(1) With the power switch turned off, unplug the AC power cord from the outlet.
(2) Disconnect the interface cable 1.
(3) Press the knobs 2 on left and right sides and open the stacker cover assy 3.
(4) Take out the image drum unit 4.
(5) Remove two screws 5, and open the manual feed guide assy 6. Lift the front side of the upper
cover 7 up and unlock the latches at two locations on the back side. Lift and remove the upper cover
assy 7.
Note : 1.
When removing or reinstalling the upper cover, be careful not to get the motor cables
tangled or caught.
2.
When reinstalling the screws 5, be sure to direct the screws into preexisting threads.
1
41356801TH Rev.1
7
3
2
5
4
2
6
49 /

Advertisement

Table of Contents
loading

This manual is also suitable for:

Okipage 14

Table of Contents