Creative Sound Blaster Audigy 2 User Manual page 63

viii.Click the OK button.
For Windows 2000 and Windows XP
i. Click Start -> Settings -> Control Panel.
ii. In the Control Panel dialog box, double-click the System icon.
iii. In the System Properties dialog box, click the Hardware tab.
iv. Click the Device Manager button.
v. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
vi. Right-click the disk drive icon. A menu will appear.
vii.Click Properties.
viii.In the Digital CD Playback box of the next dialog box, click the Enable digital CD
audio for this CD-ROM device check box to select it.
Panning a source sometimes turns off its sound.
This occurs when you are in the Digital Output Only mode and the source's left-right
balance in a software mixer application other than Creative Surround Mixer (for
example, the Windows Volume Control application) is at the opposite end compared
to the position to which you have panned the source in the Basic tab of Creative
Surround Mixer. For example, the CD Audio balance in Windows Volume Control is
on the left but in Creative Surround Mixer you have panned the CD Audio to the
right.
To solve this problem:
Open that other mixer, and center the balances for all the audio input sources.
This ensures that your analog sources will not turn silent when you pan them in
Creative Surround Mixer.
Troubleshooting and FAQs B-5