Your Sound Blaster Audigy (Sb1394) Card - Creative Sound Blaster Audigy SB1394 User Manual

Your Sound
Blaster Audigy
(SB1394) Card
Refer to the User Guide,
"Hardware Information", for
connector pin assignments.
Your Sound Blaster Audigy (SB1394) card has these connectors that allow you to
attach other devices:
CD Audio connector (CD_IN)
Connects to the Analog Audio output on a CD-ROM or DVD-
ROM drive using a CD audio cable.
Telephone Answering Device connector
(TAD)
Provides a mono connection from a standard
voice modem, and transmits microphone
signals to the modem.
For Creative's proprietary use only
Analog/Digital Out connector
6-channel or compressed AC-3 SPDIF
output for connection to external digital
devices or digital speaker systems.
Also supports Center and Subwoofer
analog channels for connection to 5.1
analog speaker systems.
Line In connector (LIN_IN)
Connects to an external device
(such as a cassette, DAT or MiniDisc
player).
Microphone In connector (MIC_IN)
Connects to an external microphone for
voice input.
Line Out connector (LIN_OUT1)
Connects to powered speakers or an external
amplifier for audio output. Also supports
headphones.
Can be used simultaneously with the Rear
Out connecter for 4.1 channel speaker
systems.
Rear Out connector (LIN_OUT2)
Connects to powered speakers or an external
amplifier for audio output.
Can be used simultaneously with the Line Out
connecter for 4.1 channel speaker systems.
Figure 1-1: Connectors and ports on the Sound Blaster Audigy (SB1394) card.
AUX connector (AUX_IN)
Connects to internal audio sources such
as TV Tuner, MPEG, or other similar
cards.
Internal SB1394 connector
(Optional)
Connects to J5 on the Audigy Drive.
For Creative's proprietary use only
SB1394 connector (SB1394)
Connects to an IEEE 1394 compatible
external device (such as a digital video
camcorder, digital still camera, printer
or scanner).
CD SPDIF connector
(CD_SPDIF)
Connects to the SPDIF (Digital
Audio) output (where available)
on a CD-ROM or DVD-ROM
drive.
Joystick/MIDI
connector
(Optional)
Connects to the
Joystick/MIDI
bracket
Installing Hardware 1-2