Sony VPL-X2000U Service Manual page 91

Aligning projectors
7
A B
A B
b
a
c
a
b
a
b
b
a
c
a b
English
7
Adjust the picture precisely as follows.
A Adjusting the vertical picture size
a The left side of the picture is enlarged and right side is
shortened, when the knob A is turned counterclockwise.
b The right side of the picture is enlarged and left side is
shortened, when the knob A is turned clockwise.
B Adjusting the horizontal picture size (adjustment range is ±15
mm)
c The picture moves leftward, when the knob B is turned
counterclockwise.
d The picture moves rightward, when the knob B is turned
clockwise.
C Adjusting the incline of the picture (adjustment range is
±2.5°)
e The picture turns rightward, when the knob C is turned
counterclockwise.
f The picture turns leftward, when the knob C is turned
clockwise.
(Continued to page 26)
24
C
C
d
e
f
d
e f
Aligning projectors
English
8
After completing the adjustment of the 1st projector, tighten
the screws (4) of the 1st projector stand.
Notes
• If the HATCH pattern is not displayed properly on the
screen, or is out of focus after the adjustments above,
repeat steps 5 and 6 to adjust finely.
• Be sure not to readjust the 1st projector after completing
the adjustments to it. When aligning all pictures, adjust
the 2nd or 3rd projector to align its picture with that of
the 1st projector.
(Continued to page 28)
26