Chapter 7: Using the TV's advanced features
Using the advanced audio
settings features
Using the QSound
®
QSound
is the original name for a positional
three-dimensional (3D) sound processing
algorithm from QSound Labs, Inc. that creates 3D
audio effects from multiple monophonic sources
and sums the outputs to two channels for
presentation over regular stereo speakers.
®
To adjust the QSound
1
Set the TV in Stereo mode (
stereo/SAP broadcasts" on Page 40).
2
From the Sound menu, press
select Advanced Audio Settings and then
press
.
3
to select the QSound feature
Pres
or
and then press
or
effect On or Off.
4
To save the new settings, highlight Done and
then press
.
To revert to the factory defaults, highlight
Reset and then press
Note: If the broadcast is monaural, the
QSound effect will not work.
52
®
sound feature
settings:
"Selecting
or
to
to turn the QSound
.
Using the Media Player
The TV allows you to enjoy photos and music
stored on a USB device.
Note: Do not insert/remove the USB device
while in use.
Media Player Specifications
Device
USB device:
USB Mass Storage Class devices (MSC)
Note:
Connectivity is not guaranteed for all
•
devices.
•
Connect the USB device to the TV
directly.
Do not use a USB hub.
•
Supported file system
FAT12, FAT16 and FAT32
Supported photo format:
JPEG Exif ver 2.2 (DCF ver 1.1)
Maximum viewable resolution: 8192 x 8192
•
pixels
Maximum photo size: 9 MB
•
Note: It may take some time to open a file of
large size.
Supported music format:
MPEG-1 (MP3)
Sampling rate: 32, 44.1, 48 kHz
•
•
ID3: ver.1, ver.2
Folder specifications
Total number of files: Less than 2000 per folder
•
You must obtain any required permission from
copyright owners to download or use copyrighted
content. Tosh ba cannot and does not grant such
permission.