Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba 15CV100U Owner's Manual

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from
four different modes, as described below.
Mode Picture Quality
Bright and dynamic picture (factory
Sports
setting)
Standard picture settings (factory
Standard
setting)
Lower contrast for darkened room
Movie
(factory setting)
Designed for viewing of PC tables
PC
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input
sources).
1
From the Picture menu, press
select Mode and then press
2
Press or to select the picture mode you
prefer and then press
Note: The picture mode you select affects the
current input only. You can select a different
picture mode for each input.
38
Chapter 6: Using the TV's features
or to
.
.

Adjusting the picture quality

You can adjust the picture quality (Contrast,
Backlight, DynaLight™, Brightness, Color, Tint,
and Sharpness) to your personal preferences.
Selection
Pressing
Contrast lower
Backlight darker
*
DynaLight On/Off
**
Brightness darker
Color paler
Tint reddish
Sharpness softer
* Backlight
This feature adjusts the brightness of the entire
screen. When in video mode and no signal is
input, this will automatically be set to 0 (Settings
are stored in memory).
** DynaLight
This function automatically strengthens the black
coloring of dark areas in the video according to
the level of darkness.
1
From the Picture menu, press
select Picture Settings and then press
2
Press or to select the picture quality you
want to adjust (Contrast, Backlight,
DynaLight, Brightness, Color, Tint, or
Sharpness).
3
Press or to adjust the setting, as
described in the table above and then press
4
To save the new settings, highlight Done and
then press . You can use any of the picture
modes ( "Selecting the picture mode" at left
column) as a starting point for adjusting the
picture settings.
To revert back to the base mode that you began
adjusting the picture settings from, highlight
Reset and then press
The picture qualities you adjusted are
automatically saved in the Preference mode (
"Selecting the picture mode" at left column) until
Reset is selected.
Pressing
higher
lighter
On/Off
lighter
deeper
greenish
sharper
or to
.
.
.