Chapter 6: Usingthe Lv's Advancedfeatures; Using The Advm_Ced Picture Settings Features; Using Dynamic Contrast; Using Cableclear Digital Noise Reduction - Toshiba 32HLV66 Operating Manual

Using the advanced picturesettings
features
Using dynamic contrast
When dynamic contrast is set to On, the TV will detect
changes in the picture quality that affect the appearance of your
contrast settings and then automatically adjust the video.
When dynamic contrast is set to Off, the settings selected in the
Contrast field in the Picture
Settings
menu will be used
(=r_ _" page 30).
To select dynamic contrast preferences:
1
2
3
SS MENU
Press
0 and open tile Video menu.
Highlight
Advanced Picture Settings
and press @.
In the
Dynamic
Contrast field, select either On or Off.
4
CableClear AuIo
MPEGNoiseReduction Low
Color Temperature Cooi
Game Mode Off
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press 0.
Note: tf you select the Movie picture mode and then set
the dynamic contrast to On, the picture mode
automatically changes to Preference in the Picture
Settings menu (_ page 30).
Using CableClear digital noise reduction
The CableClear _ digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
SS MENU
Press 0 and open the Video menu.
2 Highlight Advanced Picture
Settings
and press,@.
3
In the CableClear
field, select your desired setting.
Game Mode Off
Reset Done
4
Note:
• tf the current input is ANT I, VIDEO I, or VIDEO 2, the
menu will display the text "CableClear, " The available
selections are Off Auto, Low, Middle, and High,
• tfthe current input is Built-In DVD, ColorStream HD1,
ColorStream HD2, or HDMI, the menu will display the
text "DNR " The available selections are Off, Auto,
Low, Middle, and High, Auto will react proportionally
to the strength of the noise, Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
To save the new settings, highlight
Done find press @.
To revert to the factory defaults, highlight Reset and
press @.
Using MPEG noise reduction
The MPEG noise reduction femure allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
("grayed out").
To select the MPEG noise reduction level:
SS MENU
Press 0 find open the Video menu.
2 Highlight Advanced Picture
Settings
and press @.
3 Press • or • to highlight the MPEG Noise Reduction
field, and then press • or • to select either Off, Low,
Middle, or High.
4
NNNNNNNNNNNNNNNNNNII Reset iiiiiiiiiiiiiiii Done iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;!i
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press 0.
42