Fujitsu WOxK112LCT Design & Technical Manual page 101

State functions
z „
The current operating status of the installation can
be viewed by means of status displays.
Messages
LINE FUNCTION
8000 State heating circuit 1
8001 State heating circuit 2
8003 State DHW
8004 State cooling circuit 1
8006 State heat pump
8007 Not used
8010 Not used
8011 State swimming pool
8022 State supplementary source
State heating circuit
End user (Info level)
Thermostat response
Manual action active
Controlled drying active
Heating mode restriction
Forced draft
Comfort heating mode
Reduced heating mode
Frost protection active
Summer mode
Off
Commissioning, Engineer
Thermostat response
Manual action active
Controlled drying active
Overeating protection active
Restriction, boiler protection
Restriction, DHW priority
Restriction, storage tank
Forced draft, storage tank
Forced draft, DHW
Forced draft generator
Forced draft
Switch-off delay active
Optimis. at switch-on + accelerated heating
Optimization at switch-on
Accelerated heating
Comfort heating mode
Optimization at switch-off
Reduced heating mode
Room frost protection
Flow frost protection active
Install. frost protection active
Summer mode
Eco day active
Reduced decrease
Frost protection decrease
Room temperature limitation
Off
- (CS01 - 56) - - (CS01 - 56) -
Control system